10W Outdoor CDMA450 tetra UHF VHF LTE Mobile Signal Repeater
We can also make other band repeater as customer,feel free to contact us for your requirement!
Introduction
RF Repeater is designed to enhance cellular network coverage and fill blind spots. Main operation of the repeater is to receive low-power signal from Base Station (BS) via radio frequency (RF) transmission by its donor antenna,process, amplify and forward the signal to Mobile Station (MS) in target coverage area by its service antenna.
Features
1.Aluminum alloy enclosure for excellent heat dissipation,waterproof design for all-weather installation;
2.High out band rejection, excellent intermodulation and spurious emissions;
3.Modules structure,Multi-duplexer,two ports design,and built-in power supply,easy for maintenance and installation;
4.Adopting cavity filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
5.High linearity PA; high system gain;
6.Allowing for continuous gain adjustment 31dB by 1dB step;
7.Local and remote monitoring with automatic fault alarm.
RF Repeater Typical Application
Specifications
|
Uplink |
Downlink |
Working Frequency |
Tetra380 |
380 ~ 385 MHz |
390 ~ 395 MHz |
Tetra400 |
400 ~ 405 MHz |
410 ~ 415 MHz |
Tetra420 |
415 ~ 420 MHz |
425 ~ 430 MHz |
CDMA450 C |
450 ~ 455 MHz |
460 ~ 465 MHz |
CDMA450 A |
452.5 ~ 457.5 MHz |
462.5 ~ 467.5 MHz |
Tetra480 |
480 ~ 485 MHz |
490 ~ 495 MHz |
VHF |
136 ~ 174 MHz |
136 ~ 174 MHz |
IDEN |
806 ~ 821 MHz |
851 ~ 866 MHz |
Others |
as customized |
Output Power |
27/30/33/37/40dBm |
33/37/40/43/46dBm |
Gain |
80dB |
80-95dB |
Downlink to Uplink Separation |
3Mhz min |
MGC |
≥ 31dB / 1dB step |
VSWR |
≤1.5:1 |
In band flatness |
≤3dB |
Three order intermodulation |
≤-45dBc |
Gain adjustment accuracy |
0-10dB≤1dB |
10-20dB≤1dB |
20-30dB≤1.5dB |
System Delay |
≤5dB |
Rejection band |
Fo±0.4MHz |
≤-25dBm |
Fo±0.6MHz |
≤-35dBm |
Fo±1MHz |
≤-48dBm |
Spurious Emission |
9KHz~150KHz≤-36dBm/10KHz |
150KHz~30MHz≤-36dBm/100KHz |
30MHz~1GHz≤-36dBm/100KHz |
1GHz-12.75GHz≤-30dBm/1MKHz |
Noise Figure |
≤5dB |
I/O Impedance |
50Ω |
RF Connector |
N-Type (Female) |
Reliability |
To the GB6993-86 standard |
Electromagnetic compatibility |
To the ETS200300 694-4 standrd |
Power |
AC110V or AC220V |
Temperature Range |
-25ºC~+65ºC |
Humidity |
≤95% |
Size |
less than 660x410x200mm |
Weight |
30-35kg |
Working principle:
When the repeat antenna receives uplink signals from a subscriber, the signals will undergo processing of low-noise amplifier, filter and power amplifier first, and then be transmitted to the base station, thus accomplishing connection between subscribers in signal blind area and base station.
In this way, the blind areas are eliminated.
Considering receiving signal intensity and coverage size may vary with sites where repeater is located, it is necessary to control the gain and output of the repeater.
Additionally, considering the fading effect in spatial signal transmission, auto amplitude fixing for output is required.
For this purpose, MGC and ALC circuits are included in the uplink/downlink channels.