Customization: | Available |
---|---|
Type: | Fiber Optic Cable |
Transmission Medium: | Optical Fiber |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Main Item | Specification(on user requirement) | ||||
UpLink | DownLink | ||||
Frequency Range | EGSM&GSM | 880-915 MHz | 925-960 MHz | ||
DCS | 1710-1785 MHz | 1805-1880 MHz | |||
WCDMA | 1920-1980 MHz | 2110-2170 MHz | |||
CDMA | 824-849 MHz | 869-894MHz | |||
PCS | 1850-1910 MHz | 1930-1990 MHz | |||
AWS | 1710-1755 MHz | 2110-2155 MHz | |||
IDEN | 806-821 MHz | 851-866 MHz | |||
TETRA | 350-380 MHz | 380-410 MHz(customized) | |||
LTE | 700MHz(A,B,C,D band optional) | ||||
2500-2570 MHz | 2620-2690 MHz(customized) | ||||
Max gain | 45 | 50 | |||
ALC | Output increment will not exceed 2dB when input increase 10dB | ||||
Max output power | -12 | 37 | |||
Gain adjust step(dB) | 1 | ||||
Gain adjust range(dB) | ≥30 | ||||
Gain adjust error(dB) | 1-10 | ≤|±1.0| | |||
11-20 | ≤|±1.0| | ||||
21-30 | ≤|±1.5| | ||||
Noise figure(dB) | ≤5.0 | ≤5.0 | |||
Band flatness(dB) | ≤3.0 | ||||
Frequency error | ≤0.05ppm | ||||
Spurious emission | Out of the working frequency band (2.5MHz out of the band edge ). | 9KHz-1GHz≤-36dBm | |||
1GHz-12.75GHz≤-30dBm | |||||
IMD attenuation | In band | ≤-36dBc/30KHz | |||
Out band rejection(dB) |
2.5MHz≤ f_offset<5 MHz | ≥30 | |||
5 MHz ≤f_offset | ≥60 | ||||
vswr | ≤1.5 | ||||
Time delay(us) | ≤9 | ||||
Time delay adjust range(us) | ≥50 | ||||
Optical power(dBm) | ≥-9 | ||||
optical receiving sensitivity(dBm) | ≤-20 | ||||
Optical transmission distance(km) | ≥20 | ||||
Power supply | AC220V±20%,50±5Hz | ||||
Size(mm) | Donor unit:1u cabinet,remote unit:320×450×187(mm) | ||||
Monitor method | RJ-45/RS232 | ||||
Working environment | working temperature:-20ºC~55ºC; working humidity:15%~95%; |
||||
Protection class | IP65 | ||||
Weight | <10kg/35kg | ||||
Fiber Connector | FC/APC or SC/APC | ||||
Fiber Mode | Single mode | ||||
Optic Wavelength | 1310nm or 1550nm |
Self diagnostic platform | Microprocessor based |
Alarms | amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation. |
Local management and supervising | Built-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS) |
Remote management and supervising | Remote access via wireless GSM SMS modem OR GPRS Modem OR Ethernet, option RC (OMS) |