2g 3G 4G Indoor Tri Band Digital Signal Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Wireless
• Model NO.: ET-DR24TR-F
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Outpower: 33dBm
• Gain: 85dB
• Size: 465X320X225mm
• Weight: 20kg
• Transport Package: Carton/Wooden Box
• Specification: CE, ROHS
• Trademark: etenda
• Origin: Shenzhen
• HS Code: 8517611010
• Production Capacity: 1000PCS/Month

Product Description

2G 3G 4G indoor tri band digital signal repeater 

1.Profile
ET-DRLED24TR-F model can support 2G GSM,UMTS,3G WCDMA and 4G LTE system at same time on 800MHz 900MHz and 1800MHz, use digital IF SAW filter to support up to 4 sub band with 0.2-25MHz adjustable sub band width on each band.

1.1Features

1.Use the digital IF SAW filters, the out of band rejection is very good and comply with ETSI,3GPP and 3GPP2 standards. 
2.support up to 4 sub band with 0.2-25MHz adjustable or 1 sub band with 0.2-40MHz and 3 sub band with 0.2-25MHz.
3.Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals and digital display current Gain.
4.31dB MGC (Manual gain control) for whole band:1dB/one step available for both uplink and downlink and 25dB MGC for each sub band separately.
5.Limit the output power available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
6.Easily adjust the sub band and the channels by software to adapt to the operators' requirement without any change on the hardware, just need input the start frequency and stop frequency for each sub band.
7.LCD display Gain and actual output power for whole band and support to set the Gain by key.

1.2 Working principle
1.3.Repeater Typical Application

2.Product specification

RF Specifications
Items		Specifications
		Uplink		Downlink
Frequency Range	800MHz	832~862 MHz		791 ~ 821 MHz
	900MHz	880 ~ 915 MHz		925 ~ 960 MHz
	1800MHz	1710~ 1785 MHz		1805~ 1880 MHz
Gain Flatness		≤5dB
Sub band number		Up to 4 sub band
Sub band width		0.2-25MHz adjustable by software in steps of 200KHz
Maximum Gain		70dB		75dB
Output power		≥20dBm		≥24dBm
Max. ALC level		≥31dB
Gain Control Range /step		35dB/1dB
Intermodulation attenuation		≤-45dBc/30KHz
Out of band Rejection	±500KHz	≤-40dBc
	±1MHz	≤-50dBc
Spurious Emission	Within working band	≤-60dBc/3kHz
	Out of working band	9kHz~1GHz:≤-36dBm/100kHz
		1GHz ~12.75GHz:≤-30dBm/1MHz
Group Delay		≤5-10μs depending on filter bandwidth
Frequency stability		≤ 0.01ppm
EVM		≤5%(RMS)
Noise Figure		≤8dB
VSWR		≤1.5
Power		AC110,AC220,DC24 or DC48
Power consumption		≤100watts
MTBF		≥50000 hours
Monitor and control Specifications
Local Monitor and control			PC by USB Port
Remote Monitor and control(Optional)			Remote access via wireless Mobile network or Ethernet
Mechanical Specifications
I /O Port			N-Female
Impedance			50 ohm
Operating Temperature			-40ºC~+55ºC
Environment Conditions			IP40
Dimensions			445x268x65mm
Weight			≤ 8Kg
Mounting			Wall mounting as standard, option PK for pole mounting.