Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Cable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
30dBm 85dB Band Selective & Industrial signal booster with remote monitor and control repeater
Band selective & industrial repeater introduction
Band selective & industrial repeater are designed to use for specific operator or the user who have stringent requirements on out of band rejection and bandwidth and flatness and monitor of repeater,it has below characteristic:
Electrical specification | Uplink | Downlink | |
Frequency Range | CDMA450 | 452.5~457.5MHz | 462.5~467.5MHz |
CDMA850 or LTE | 824~849MHz | 869~894MHz | |
GSM900 or LTE | 890 ~ 915 MHz | 935 ~ 960 MHz | |
EGSM900 or LTE | 880 ~ 915 MHz | 925 ~ 960 MHz | |
DCS1800 or LTE | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |
PCS1800 or LTE | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |
WCDMA2100 or LTE | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |
AWS2100 or LTE | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |
LTE | 698~716MHz | 728~746MHz | |
776~787MHz | 746~757MHz | ||
832~862MHz | 791~821MHz | ||
2500 ~ 2570 MHz | 2620 ~ 2690 MHz | ||
as developed | |||
IDEN800 | 806MHz~821MHz | 85lMHz~866MHz | |
TETRA | 380~385MHz(or customized) | 390~395MHz(or customized) | |
Passband Ripple | GSM/DCS | ≤5dB | |
WCDMA | ≤2dB/3.84MHz and ≤5dB/p-p | ||
Max .Gain | ≥75dB | ≥85dB | |
Max .Output Power | ≥23dBm | ≥30dBm | |
Out of Band Gain | ±600KHz | ≤ 40dB | ≤ 45dB |
±1MHz | ≤ 35dB | ≤ 40dB | |
±2MHz | ≤ 30dB | ≤ 35dB | |
±5KHz | ≤ 25dB | ≤ 25dB | |
MGC(Step Attenuation) | 31dB / 1dB step | ||
Automatic Level Control | ≥ 25dB | ||
Noise Figure | ≤ 6dB | ||
Spurious Emission | 9KHz~1GHz | ≤ -36dBm | ≤ -36dBm |
1GHz~12.75GHz | ≤ -30dBm | ≤ -30dBm | |
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |
Modulation Accuracy | ≤ 12.5% | ||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||
ACRR | ≥ 20dBc/30KHz @ ±5MHz | ||
≥ 30dBc/30KHz @ ±10MHz | |||
VSWR | ≤ 1.5 | ||
IMD3 | ≤-40dBc | ||
Group Delay | ≤ 5μs | ||
Frequency stability | ≤ 0.01ppm | ||
MTBF | 100,000 Hrs | ||
LED Alarm | Standard | ||
PWR LED | Green @ Normal work No light@ Power Supply issue |
||
WI LED GI LED |
Green @ Normal work Red@ strong input signals or severe self oscillation |
||
WP LED DP LED GP LED |
the power light will display the actual output power of repeater.WP is for 2100MHz;DP is for 1800MHz and GP is for 1900MHz; | ||
Monitor and control Specifications | Standard | ||
Local monitor and control | PC by USB Port | ||
Remote monitor and control | Remote access via wireless GSM SMS modem or GPRS Modem | ||
Mechanical Specifications | Standard | ||
I /O Port | N--Female | ||
Impedance | 50 ohm | ||
Operating Temperature | -25ºC~+55ºC | ||
Environment Conditions | IP65 | ||
Dimensions | 465*320*215mm | ||
Weight | ≤ 16KG | ||
Power Supply | AC180~264V | ||
Power consumption | ≤ 100W |
24dbm EGSM900 band selective repeater (Same repeater just shift the frequency by software) |
||
|
||
24dbm DCS1800 band selective repeater (Same repeater just shift the frequency by software) |
||
|
||
24dbm WCDMA2100 industrial repeater |
Monitor and control software introduction
Description