CDMA450MHz UHF Tetra Fiber Optic Signal Repeater

Product Details
Customization: Available
Type: Signal Repeater
Transmission Medium: Cable
Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 HKD
Plant Area
501~1000 square meters
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
  • CDMA450MHz UHF Tetra Fiber Optic Signal Repeater
Find Similar Products

Basic Info.

Model NO.
ET-CRFO43S-F
Standard
Standard
Lightning Protection
With Lightning Protection
Certification
ISO, RoHS
Condition
New
Outpower
20watt
Gain
90dB
Band
VHF UHF Tetra CDMA450
Work Environment
Outdoor
Noise Figure
5dB
Group Delay
1.5us
Vswr
1.5
Inband Flatness
3dB
Gain Control Range
0~30dB
Power Supply
220VAC
Transport Package
Conton or Wooden Case
Specification
CE, ROHS
Trademark
etenda
Origin
Shenzhen
HS Code
8517611010
Production Capacity
500PCS/Month

Product Description

CDMA450MHz UHF Tetra Fiber Optic Signal Repeater 

This repeater is mainly applicable to such case:
Underground fiber optic cable network already exists beneath the area to be covered;there is huge obstructive terrain between the BTS and the area to be covered;the distance between the BTS and the area to be covered is 20 km around.

Features

1 Waterproof box suitable for outdoor service;

2 Metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure;

3 Full-duplex & dual-port design, and built-in power supply;

4 Allowing for continuous gain adjustment and gain contrast;

5 ALC technology used to provide auto amplitude fixing;

6 Power, uplink and downlink output indications;

7 Can support up to 8 pcs RU with 1 pcs MU


Specifications
        Master Unit (Cable Access) of Fiber Optic Repeater
Main Item Specification(on user requirement)
UpLink DownLink
Frequency Range 450-455/452.5-457.5Mhz  460-465/462.5-467.5Mhz
Maximum Gain 15dB 15dB
ALC Output increment will not exceed 2dB when input increase 10dB
Frequency Error ≤±0.5ppm
Gain Control Range 0~30dB
RF Output Power 10dBm 10dBm
Noise Figure ≤5dB
Group Delay ≤1.5us
Inband Flatness ≤3dB
Intermodulation attenuation Inband ≤-65dBc/30KHz
Outband                   (0ff 2.5MHz) ≤-36dBm/30KHz 9KHz-1GHz
≤-30dBm/30KHz 1GHz-12.75GHz
Outband Rejection
Selective Channel
≤-40dB 2.5MHz (more or less)
≤-60dB 10MHz (more or less)
Spurious emission   ≤-36dBm/30KHz 9KHz-1GHz
≤-30dBm/30KHz 1GHz-12.75GHz
VSWR ≤1.5
Power Supply 220VAC
Size 19'' Standard rack, 3U Height
Weight 8Kg
Work temperature -40ºC~+55ºC or -25ºC~+65ºC
Relative humidity ≤95%
Operation Configuration LCD Display, Manual Key-press
PC RS232 Port or RJ485
GSM MODEM (Optional, Alarm)
SNMP (Optional)
Others Refer to user manual for more specification
Fiber Connector FC/APC or SC/APC
Fiber Mode Single mode or Multiple Mode
Optic Wavelength 1310nm or 1550nm
Optic Output Power 2dBm 2dBm (more or less)
  
Slave Unit of Fiber Optic Repeater
 
Main Item Specification(on user requirement)
UpLink DownLink
Frequency Range 450-455/452.5-457.5Mhz  460-465/462.5-467.5Mhz
Maximum Gain 50dB 55dB
Band width per band 0.025MHz or 0.05MHz or 0.1MHz
Numbers of Sub-band 1, 2,4,6,8
(Center frequency of each sub-band is adjustable)
ALC Output increment will not exceed 2dB when input increase 10dB
Frequency Error ≤0.5ppm (more or less)
Gain Control Range 0~30dB
RF Output Power 10dBm 43dBm
Noise Figure ≤5dB
Group Delay ≤1.5us
Inband Flatness ≤3dB
Intermodulation attenuation Inband ≤-65dBc/30KHz
Outband                   (0ff 2.5MHz) ≤-36dBm/30KHz 9KHz-1GHz
≤-30dBm/30KHz 1GHz-12.75GHz
Outband Rejection
Selective Channel
≤-40dB  (more or less) 2.5MHz
≤-60dB (more or less) 10MHz
Spurious emission   ≤-36dBm/30KHz 9KHz-1GHz
≤-30dBm/30KHz 1GHz-12.75GHz
VSWR ≤1.5
Power Supply 220VAC
Size 660mm x400mm x235mm  
Weight 35Kg
Work temperature -40ºC~+55ºC or -25ºC~+65ºC
Relative humidity ≤95%
Operation Configuration LCD Display, Manual Key-press
PC RS232 Port or RJ485
GSM MODEM Alarm (Optional)
SNMP (Optional)
Dry Contact alarm Port (Optional)
Others Refer to user manual for more specification
Fiber Connector FC/APC or SC/APC
Fiber Mode Single mode or Multiple Mode
Optic Wavelength 1310nm or 1550nm
Optic Output Power 2dBm(more or less 2dBm)
CDMA450MHz UHF Tetra Fiber Optic Signal RepeaterCDMA450MHz UHF Tetra Fiber Optic Signal RepeaterCDMA450MHz UHF Tetra Fiber Optic Signal Repeater

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier