Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater

Product Details
Customization: Available
Type: Fiber Optic Cable
Transmission Medium: Optical Fiber
Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 HKD
Plant Area
501~1000 square meters
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
  • Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater
Find Similar Products

Basic Info.

Model NO.
ET-CRDFO43T-F
Standard
Standard
Lightning Protection
With Lightning Protection
Certification
ISO, RoHS, CE
Condition
New
Band
GSM/CDMA/Dcs/PCS/3G/4G LTE/5g/Tetra
Work Environment
Indoor or Outdoor
Outpower
From 33dBm to 43dBm
Logo
Customized
Gain
50dB
Gain Adjust Range
>30dB
Noise Figure
<5.0dB
Vswr
<1.5
Time Delay
<9us
Band Flatness
<3dB
Transport Package
Carton or Wooden Case
Specification
CE, ROHS
Trademark
ETENDA
Origin
Shenzhen
HS Code
8517611010
Production Capacity
500PCS/Month

Product Description

Tetra LTE 4G 700M/2600M 3G digital fiber optic signal booster amplifier repeater 

Technical features
  1. Waterproof Remote Repeater box suitable for outdoor service;
  2. Metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure; 
  3. It support EGSM&GSM,DCS,WCDMA triple band or 2G 3G 4G any triple band;
  4. Optical fiber transmission, single equipment and SINGLE fiber, few nodes, single wiring, simple construction and installation, high system reliability and convenient maintenance;
  5. Output power of each system can be adjusted to improve the accuracy of coverage;
  6. The power amplifier adopts digital predistortion technology to improve the efficiency of the whole equipment;
  7. It supports optical bypass and optical loop;
  8. It supports star, daisy chain and hybrid networking mode, with flexible networking;
  9. The intelligent start-up station can be directly installed after site selection and can be directly used without debugging gain matching.
Typical applications

There are 4 optical ports in the donor unit of the digital fiber optic repeater. A single optical port can chain connect 6 remote units, 4 optical ports max can carry up to
24 remote units.It can form a distributed coverage system to cover a wide range, especially suitable for long-distance strip coverage area.
         
         Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater 

Main Specification  
 
Main Item Specification(on user requirement)
UpLink DownLink
Frequency Range EGSM&GSM 880-915 MHz 925-960 MHz
DCS 1710-1785 MHz 1805-1880 MHz
WCDMA 1920-1980 MHz 2110-2170 MHz
CDMA 824-849 MHz 869-894MHz
PCS 1850-1910 MHz 1930-1990 MHz
AWS 1710-1755 MHz 2110-2155 MHz
IDEN 806-821 MHz 851-866 MHz
TETRA 350-380 MHz 380-410 MHz(customized)
LTE 700MHz(A,B,C,D band optional)  
2500-2570 MHz 2620-2690 MHz(customized)
Max gain 45 50
ALC Output increment will not exceed 2dB when input increase 10dB
Max output power -12 37
Gain adjust step(dB) 1
Gain adjust range(dB) ≥30
Gain adjust error(dB) 1-10 ≤|±1.0|
11-20 ≤|±1.0|
21-30 ≤|±1.5|
Noise figure(dB) ≤5.0 ≤5.0
Band flatness(dB) ≤3.0
Frequency error ≤0.05ppm
Spurious emission Out of the working frequency band (2.5MHz out of the band edge ). 9KHz-1GHz≤-36dBm
1GHz-12.75GHz≤-30dBm
IMD attenuation In band ≤-36dBc/30KHz
Out band
rejection(dB)
2.5MHz≤ f_offset<5 MHz ≥30
5 MHz ≤f_offset ≥60
vswr ≤1.5
Time delay(us) ≤9
Time delay adjust range(us) ≥50
Optical power(dBm) ≥-9
optical receiving sensitivity(dBm) ≤-20
Optical transmission distance(km) ≥20
Power supply AC220V±20%,50±5Hz
Size(mm) Donor unit:1u cabinet,remote unit:320×450×187(mm)
Monitor method RJ-45/RS232
Working environment working temperature:-20ºC~55ºC;
working humidity:15%~95%;
Protection class IP65
Weight <10kg/35kg
Fiber Connector FC/APC or SC/APC
Fiber Mode Single mode
Optic Wavelength 1310nm or 1550nm

Supervising Specifications
 
Self diagnostic platform Microprocessor based
Alarms amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation.
Local management and supervising Built-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS)
Remote management and supervising Remote access via wireless GSM SMS modem OR GPRS Modem     OR Ethernet, option RC (OMS)
Tetra LTE 4G 700m/2600m 3G Digital Fiber Optic Signal Booster Amplifier Repeater

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier