27dBm 80dB Aws Signal Booster Mobile Signal Booster

Product Details
Customization: Available
Type: Signal Repeater
Transmission Medium: Cable
Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 HKD
Plant Area
501~1000 square meters
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
  • 27dBm 80dB Aws Signal Booster Mobile Signal Booster
Find Similar Products

Basic Info.

Model NO.
ET-CRA27S-F
Standard
Standard
Lightning Protection
With Lightning Protection
Certification
ISO, RoHS, CE
Condition
New
Outpower
27dBm
Gain
80dB
Band
Aws
Coverage
1500-3500sq. M
Transport Package
Carton
Specification
CE, ROHS
Trademark
etenda
Origin
Shenzhen
HS Code
8517611010
Production Capacity
1000PCS/Month

Product Description

27dBm 80dB Aws Signal Booster mobile signal booster

Overview:

27dBm signal repeater single system series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market, big office...It can support any one system of CDMA, GSM, EGSM, DCS, PCS, WCDMA, AWS, LTE.
Using a revolutionary technology that protects the carrier network, the ET-CR27S-F single system repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.
This process creates a "Cell Zone" in blind signal area.

Features:

1. Elegant and Compact design.
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4.Limit output power available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption.


Specification:
Electrical specification   Uplink Downlink
Frequency Range CDMA850 824 ~ 849 MHz 869 ~ 894 MHz
GSM900 890 ~ 915 MHz 935 ~ 960 MHz
EGSM 880 ~ 915 MHz 925 ~ 960 MHz
DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz
PCS 1850 ~ 1910 MHz 1930 ~ 1990 MHz
WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz
AWS 1710 ~ 1755 MHz 2110 ~ 2155 MHz
LTE 700 MHz( A, B, C, D band optional)
2500 ~ 2550 MHz 2620 ~ 2670 MHz
Max .Gain ≥ 75dB ≥ 80dB
Max .Output Power ≥ 20dBm ≥ 27dBm
Band width (-3dB) Wide Band
MGC ( Step Attenuation ) ≥ 31dB / 1dB step
Automatic Level Control                               ≥ 31dB
Gain Flatness ≤6dB(P-P)
Noise Figure ≤6dB
VSWR ≤1.8
Group Delay ≤5μs
Frequency stability ≤0.01ppm
Spurious Emission & Output inter-modulation GSM Meet ETSI TS 151 026 V6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
LED Alarm Standard
Power LED Green light when power on.
Mechanical Specifications Standard
I /O Port N-Female
Impedance  50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions 270x190x55mm
Weight ≤ 4.5Kg
Power Supply Input AC90~264V,output DC10V / 6A
 
27dBm 80dB Aws Signal Booster Mobile Signal Booster27dBm 80dB Aws Signal Booster Mobile Signal Booster27dBm 80dB Aws Signal Booster Mobile Signal Booster27dBm 80dB Aws Signal Booster Mobile Signal Booster27dBm 80dB Aws Signal Booster Mobile Signal Booster

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier