| Customization: | Available |
|---|---|
| Usage: | Signal Amplify |
| Type: | RF Power Amplifier |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Frequency(GHz) | 7.9 - 8.4 or Customized |
| Output Power(W) | 60±1(1000W ) |
| Input Power | ≤5dBm |
| ALC Range(dB) | ≥31 |
| Gain(dB) | 60 or Customized |
| Gain Adjustment range(dB) | >31/1dB step or Customized |
| Gain Adjustment Linearity(dB) | ≤±1 |
| Gain Flatness(dB) | ±1(Max) |
| Impedance(ohm) | 50 |
| Input/output VSWR | ≤1.4:1 |
| Noise Figure | 6dB |
| Efficiency@CW | ≥20% |
| Odd harmonics | ≥12dBc |
| Even harmonics | ≥15dBc |
| Harmonics@CW | >60dBc |
| Voltage(V) | 180-270Vac |
| RF Connector | N-Female or other Customized |
| Power supply Interface | Pull-core capacitance |
| Monitor interface | RS-485 or RS232 or other Customized |
| Monitoring communication protocols | Use Manufacturers protocol or Customized |
| Working Temperature | -40~+65 degree |
| Storage Temperature | -55 to +85 degree |
| Operating Humidity | 0 to 90%, relative |
| weight | ≤20KG |
| Surface Color | Metal color conductive oxide and other color customized |
| Remark | Module with output short circuit or open circuit protection |
| No. | Monitoring function | Description | |
| 1 | query | PA ALARM | When an alarm amplifier failure |
| 2 | SWR ALARM | Amplifier output reflection is too large, VSWR exceeds 3:1, an alarm is generated | |
| 3 | Over temperature alarm | Module internal temperature exceeds 85 ºC, generates an alarm and turn off the amplifier until the temperature returns to below 65 ºC, re-open the amplifier | |
| 4 | Over output power alarm | When the output power exceeds the nominal full power 2dB is an alarm | |
| 5 | Input power detection | Accuracy of ± 1dB | |
| 6 | Reverse power detection | Accuracy of ± 1dB | |
| 7 | output power detection | Detecting the actual output power amplifier,Accuracy of ± 1dB | |
| 8 | Temperature detection | Detection module operating temperature, detection range: -25 ~ +90 ºC, Accuracy of ± 3 ºC | |
| 10 | VSWR | Detecting amplifier output port VSWR range of 1.2 ~ 4.0 | |
| 11 | query and set | PA attenuator Set and query | Set and query the value of ATT |
| 12 | PA switching query and set | Query and set the state open tube amplifier | |
){kind=link}