30dBm Tri Band Digital Signal Booster Amplifier Repeater

• Customization: Available
• Type: Signal Repeater
• Transmission Medium: Wireless
• Model NO.: ET-CR30TI-F
• Standard: Standard
• Lightning Protection: With Lightning Protection
• Certification: ISO, RoHS, CE
• Condition: New
• Outpower: 30dBm
• Gain: 85dB
• Size: 445X268X60mm
• Weight: 8kg
• Transport Package: Carton/Wooden Box
• Specification: CE, ROHS
• Trademark: etenda
• Origin: Shenzhen
• HS Code: 8517611010
• Production Capacity: 1000PCS/Month

Product Description

30dbm tri band digital signal booster amplifier repeater

1.Profile
ET-DRDWL30TI-F model can support 2G GSM,UMTS,3G WCDMA and 4G LTE system at same time on 1800MHz 2100MHz and 2600MHz, use digital IF SAW filter to support up to 4 sub band with 0.2-25MHz adjustable sub band width on each band.  

1.1Features

1.Use the digital IF SAW filters, the out of band rejection is very good and comply with ETSI,3GPP and 3GPP2 standards. 
2.support up to 4 sub band with 0.2-25MHz adjustable or 1 sub band with 0.2-40MHz and 3 sub band with 0.2-25MHz.
3.Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals and digital display current Gain.
4.31dB MGC (Manual gain control) for whole band:1dB/one step available for both uplink and downlink and 25dB MGC for each sub band separately.
5.Monitor by PC monitor software or Cloud monitor system.
    It can be local and remote monitored and controlled by our own software which is based on SQL data and server. local monitored and controlled by USB port 
     Remote monitored and controlled via 2G,3G,4G data or Ethernet
     More parameters can be monitor by software, such as DL PA temperature, Input power, DL output power, DL actual Gain, AGC Value, etc
     It also has many alarms, such as input power over or low alarm, output power over or low alarm, DL PA over temperature alarm, self-oscillation alarm etc. 
    It also support to set DL ATT, UL ATT, PA power on/off and change the alarm threshold by Monitor software.
6.Limit the output power available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.

1.2 Repeater Typical Application  


1.3 Working Principle  


2.Product specification

RF Specifications
Items		Specifications
		Uplink		Downlink
Frequency Range	1800MHz	1710~ 1785 MHz		1805~ 1880 MHz
	2100MHz	1920 ~ 1980 MHz		2110 ~ 2170 MHz
	2600MHz	2500~ 2570 MHz		2620~ 2690MHz
Gain Flatness		≤5dB
Sub band number		Up to 4 sub band
Sub band width		0.2-25MHz adjustable by software in steps of 200KHz
Maximum Gain		70dB		85dB
Output power		≥23dBm		≥30dBm
Max. ALC level		≥31dB
Gain Control Range /step		35dB/1dB
Intermodulation attenuation		≤-45dBc/30KHz
Out of band Rejection	±500KHz	≤-40dBc
	±1MHz	≤-50dBc
Spurious Emission	Within working band	≤-60dBc/3kHz
	Out of working band	9kHz~1GHz:≤-36dBm/100kHz
		1GHz ~12.75GHz:≤-30dBm/1MHz
Group Delay		≤5-10μs depending on filter bandwidth
Frequency stability		≤ 0.01ppm
EVM		≤5%(RMS)
Noise Figure		≤8dB
VSWR		≤1.5
Power		AC110,AC220,DC24 or DC48
Power consumption		≤100watts
MTBF		≥50000 hours
Monitor and control Specifications
Local Monitor and control			PC by USB Port
Remote monitor			Remote access Via Ethernet or mobile data
Mechanical Specifications
I /O Port			N-Female
Impedance			50 ohm
Operating Temperature			-40ºC~+55ºC
Environment Conditions			IP40
Dimensions			445x268x60mm
Weight			≤ 8Kg
Mounting			Wall mounting as standard, option PK for pole mounting.

 3.List of complete equipment  

S/N	Model Number	Descripe	Quantity
1	ET-DRDWL23T-F	23dBm 80dB G1800/L1800/U2100/L2100/LTE2600 Digital repeater with Four subband and GSM/LTE and ethernet module	1pcs
2	ET0727-11	9/11dBi 700-2700MHz Outdoor Log-Periodic Antenna	1pcs
3	ET072703	3/5dBi 700-2700MHz ceiling Antenna	2pcs
4		½ inch RF cables for connecting antennas	100 meters
5		RF cable connectors	10pcs
6	ET-0727-SR2	Splitter