1-50W outdoor IP65 VHF RF Signal Booster
Features:
1) Waterproof professional Die-casting cabinet suitable in outdoor and indoor
2) Pole-installation, Wall-installation and Tower-installation are available
3) Cavity filter and IF SAW gives higher isolation, better gain flatness, higher stability, and lower noise figure;
4) Allowing for continuous gain adjustment and gain contrast;
5) ALC technology used to provide auto amplitude fixing.
6)
Press-key , Local PC GUI and remote GSM MODEM management
Specifications
| Item |
Specification |
|
| Up-Link |
Down-Link |
| Frequency range |
136 - 174 Mhz |
136 - 174 Mhz |
|
| 350 - 520 Mhz |
350 - 520 Mhz |
|
| 806 - 821Mhz |
851 - 866Mhz |
|
| Customized |
Customized |
|
| Band width (-3dB) |
available upon request |
|
| Downlink to Uplink Separation |
3Mhz min |
|
| Output Power |
30-37 dBm(1-5W) |
30-46 dBm(1-40W) |
|
| Nominal Gain |
65-95±3dB |
|
| Gain Flatness |
≤ 3dB (p-p) |
|
| MGC ( Step Attenuation ) |
≥ 31dB / 1dB step |
|
| AGC Rang |
0-30dB |
|
| Max. ALC level |
≥25dB |
|
Intermodulation attenuation
) |
≤-45dBc |
|
| Spurious emission |
9kHz-1GHz |
≤-36dBm |
|
| 1GHz-12.75GHz |
≤-30dBm |
|
| Noise Figure. |
≤5dB(at maximum output power) |
|
| Group delay |
≤5us |
|
| VSWR |
≤1.5 |
|
| Frequency stability |
≤ 0.01ppm |
|
| RF Connectors |
N - female |
|
| Impedance |
50 Oms |
|
Supervising Specifications
| Self diagnostic platform |
Microprocessor based |
| Alarms |
Yes, amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation. |
| Local management and supervising |
Built-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS) |
| Remote management and supervising |
Remote access via wireless GSM SMS modem OR GPRS Modem OR Ethernet, option RC (OMS) |
| AC Supply |
110/220 VAC or 12/24/28/48VDC |
| Housing |
IP65 |
| Temp rang |
-30 to +60 ºC |
Audited Supplier 
){kind=link}
){kind=link}