100W Dcs band Power Amplifier
The output power can be from 5w to 500w or more.
It has excellent broadband network matching,wide dynamic range,low distortion,high efficiency with small size and light weight features,it can helping solve customer's most complex challenges in areas including network capacity,signal coverage,energy efficiency,and field reliability.
This type IMD3 is
≤-36dBc. All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely.
Technical Specifications
| Frequency(MHz) |
1805-1880Mhz or Customized |
| Input Power(dBm) |
≤0-20dBm or Customized |
| Output Power(dBm) |
50±1(100W ) or lower |
| Gain(dB) |
50dB or less |
| Inband Ripple(dB) |
≤±1.5 or less |
| ALC Range(dB) |
≥5 |
| Gain flatness |
≤3dB |
| Input/Output VSWR |
≤1.5:1 |
| Impedance(ohm) |
50 |
| Voltage(V) |
DC+28 |
| Working current |
<10-16A |
| Efficiency |
≥20%-40% or Customized |
| Spurious |
>60dBc |
| IMD3(dBc)(optional) |
-36,-40,-45dbc |
| RF In/Out Connector |
SMA-Female |
| Monitor interface |
RS-485 or RS232 or other Customized |
| Working Temperature |
-25~+65 degree |
| Storage Temperature |
-40 to +85 degree |
| Operating Humidity |
0 to 90%, relative |
| Weight |
≤1.5KG |
| Protection |
High temperature,High VSWR,Open circuit or customized |
| Monitoring |
Forward power,Reverse power,VSWR,Temperature,Enable |
| Cooling |
External Heat sink |
Audited Supplier 
){kind=link}
){kind=link}