Customization: | Available |
---|---|
Type: | Signal Repeater |
Transmission Medium: | Cable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
What is a signal booster? |
A signal booster is a wireless signal relay transmission device that helps to extend the cellular coverage footprint in areas of weak or poor coverage. |
It is ideal for use where a larger coverage range is required and for use in buildings where the signal may be interrupted by metal structures, thick walls, etc., such as found in commercial buildings, villages and industrial areas.
It can support any dual band system of CDMA450,TETRA,CDMA,IDEN,EGSM,GSM,DCS, PCS,WCDMA,AWS,LTE.RF Specifications | |||
Items | Specifications | ||
Uplink | Downlink | ||
Frequency Range | CDMA450 | 452.5 ~ 457.5MHz | 462.5 ~ 467.5MHz |
CDMA850 or LTE | 824 ~ 849MHz | 869 ~ 894MHz | |
GSM900 or LTE | 890 ~ 915 MHz | 935 ~ 960 MHz | |
EGSM900 or LTE | 880 ~ 915 MHz | 925 ~ 960 MHz | |
DCS1800 or LTE | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |
PCS1800 or LTE | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |
WCDMA2100 or LTE | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |
AWS2100 or LTE | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |
LTE | 698 ~ 716MHz | 728 ~ 746MHz | |
746 ~ 757MHz | 776 ~ 787MHz | ||
791 ~ 821MHz | 832 ~ 862MHz | ||
2500 ~ 2570 MHz | 2620 ~ 2690 MHz | ||
as developed | |||
IDEN800 | 806MHz ~ 821MHz | 85lMHz ~ 866MHz | |
TETRA | 380 ~ 385MHz (or customized) |
390 ~ 395MHz (or customized) |
|
Gain | ET-CR27S-F | ≥ 75dB | ≥ 80dB |
ET-CR30S-F | ≥ 80dB | ≥ 85dB | |
Output power | ET-CR27S-F | ≥ 20dBm | ≥ 27dBm |
ET-CR30S-F | ≥ 23dBm | ≥ 30dBm | |
Band width | Wide Band | ||
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | ||
Automatic Level Control | ≥ 40dB | ||
Gain Flatness | ≤3-5dB(P-P) depend on the frequency and bandwidth | ||
Noise Figure | ≤6dB | ||
VSWR | ≤1.6 | ||
Group Delay | ≤6μs | ||
Frequency stability | ≤0.01ppm | ||
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 | ||
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
CDMA Meet IS95 & CDMA2000 | |||
MTBF | >50000 hours | ||
Power Consumption | < 25W | ||
Power Supply | Input AC90~264V,output DC9V / 5A | ||
Impedance | 50 ohm | ||
Mechanical Specifications | |||
I /O Port | N-Female | ||
Operating Temperature | -25ºC~+55ºC | ||
Environment Conditions | IP40 | ||
Dimensions | 270x240x55mm/10.6x9.4x2.2inch | ||
Weight | ≤ 4Kg |