100watt 100Mhz to 6000Mhz Broadband/wideband RF Amplifier
All the parameters of PA can be customized depend on your request, if you have any customized parameters pls contact us freely!
We can make linear broadband amplifiers from 1Mhz-6000Mhz,can support COFDM,multi-media modulations !
Introduction
The ET-PAUFW Series is made for solid state broadband frequencies,which can used for ground,shipborne,airborne or other military equipments.
The output power can be from 5w to 200w or more,it has excellent broadband network matching,wide dynamic range,low distortion,high efficiency with small size and light weight features.
We can guarantee output power performance through the whole bandwidth!
Specification
Frequency(MHz) |
100-6000Mhz Customized |
Input Power(dBm) |
≤0-10dBm or Customized |
Output Power(dBm) |
50±1(100W ) or higher |
Gain(dB) |
50dB or less |
Inband Ripple(dB) |
≤±1.5 or less |
ALC Range(dB) |
≥5 |
Gain flatness |
≤3dB |
Input/Output VSWR |
≤1.5:1 |
Impedance(ohm) |
50 |
Voltage(V) |
DC+28 |
Working current |
TBC |
Efficiency |
≥20%-40% or Customized |
Harmonics |
ODD≥15dBc;EVEN≥15dBc |
Spurious |
>60dBc |
RF In/Out Connector |
SMA-Female |
Monitor interface |
RS-485 or RS232 or other Customized |
Working Temperature |
-25~+65 degree |
Storage Temperature |
-40 to +85 degree |
Operating Humidity |
0 to 90%, relative |
Weight |
≤1.5KG |
Protection |
High temperature,High VSWR,Open circuit or customized |
Monitoring |
Forward power,Reverse power,VSWR,Temperature,Enable,Over output power |
Cooling |
External Heat sink |