10watt 90dB Outdoor WCDMA 2100MHz 3G UMTS Repeater
|FOB Price:||Get Latest Price|
|Min. Order:||1 Piece|
|Transport Package:||Carton or Wooden Case|
|Payment Terms:||T/T, Western Union|
- Model NO.: ET-CRW40WS-F
- Transmission Medium: Cable
- Lightning Protection: With Lightning Protection
- Condition: New
- Gain: 90dB
- Work Environment: Outdoor
- Vswr: 1.5
- I/O Impedance: 50
- Noise Figure: 5dB
- Specification: CE, ROHS
- HS Code: 8517611010
- Type: Signal Repeater
- Standard: Standard
- Certification: ISO
- Outpower: 10watt
- Band: WCDMA
- RF Connector: N-Female
- System Delay: 5us
- Three Order Intermodulation: -45dbc
- Trademark: etenda
- Origin: Shenzhen
RF Repeater is designed to enhance cellular network coverage and fill blind spots. Main operation of the repeater
is to receive low-power signal from Base Station (BS) via radio frequency (RF) transmission by its donor antenna,
process, amplify and forward the signal to Mobile Station (MS) in target coverage area by its service antenna.
1 Waterproof box suitable for outdoor service;
2 Metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure;
3 Full-duplex & dual-port design, and built-in power supply;
4 Allowing for continuous gain adjustment and gain contrast;
5 ALC technology used to provide auto amplitude fixing;
6 Power, uplink and downlink output indications.
RF Repeater Typical Application
|Working Frequency||CDMA850||824 ~ 849 MHz||869 ~ 894 MHz|
|GSM850||824 ~ 849 MHz||869 ~ 894 MHz|
|GSM900||880 ~ 915 MHz||935 ~ 960 MHz|
|DCS||1710 ~ 1785 MHz||1805 ~ 1880 MHz|
|PCS||1850 ~ 1910 MHz||1930 ~ 1990 MHz|
|WCDMA||1920 ~ 1980 MHz||2110 ~ 2170 MHz|
|AWS||1710 ~ 1755 MHz||2110 ~ 2155 MHz|
|LTE||700 MHz( A, B, C, D band optional)|
|2500 ~ 2570 MHz||2620 ~ 2690 MHz|
|Three order intermodulation||≤-45dBc/30KHz|
|Gain adjustment accuracy||0-10dB≤1dB|
|RF Connector||N-Type (Female)|
|Reliability||To the GB6993-86 standard|
|Electromagnetic compatibility||To the ETS200300 694-4 standrd|
|Power||AC110V or AC220V|
|Operation Configuration||LCD Display, Manual Key-press, PC RS232 Port|
|GSM MODEM (Optional)|
|Ethernet RJ45 (Optional)|
When received by the repeater, the downlink signals from BTS will go through the duplexer, which acts to filter out the out-band spurious, and then further through low-noise amplifier, and power amplifier, reach the repeat end, where signals are passed to antenna through duplexer, and emitted to the whole covered area, thus completing a round of downlink channel function.
When the repeat antenna receives uplink signals from a subscriber, the signals will undergo processing of low-noise amplifier, filter and power amplifier first, and then be transmitted to the base station, thus accomplishing connection between subscribers in signal blind area and base station.
In this way, the blind areas are eliminated.
Considering receiving signal intensity and coverage size may vary with sites where repeater is located, it is necessary to control the gain and output of the repeater.
Additionally, considering the fading effect in spatial signal transmission, auto amplitude fixing for output is required.
For this purpose, MGC and ALC circuits are included in the uplink/downlink channels.