Gold Member Since 2014
Audited Supplier
Shenzhen Etenda Technology Limited

Repeater, RF Power Amplifier, GSM Repeater manufacturer / supplier in China, offering 30dBm 85dB GSM/Dcs/WCDMA 2g 3G Mobile Signal Repeater, Intelligent Repeater Mobile Signal Repeater 700, High Power GSM Dcs 900MHz 1800MHz Mobile Signal Booster and so on.

(/ )

Supplier Homepage Product Indoor Signal Repeater 30dBm 85dB GSM/Dcs/WCDMA 2g 3G Mobile Signal Repeater

30dBm 85dB GSM/Dcs/WCDMA 2g 3G Mobile Signal Repeater

FOB Price: Get Latest Price
Min. Order: 1 Piece
Port: Shenzhen, China
Production Capacity: 1000PCS/Month
Payment Terms: T/T, Western Union

Request a custom order and have something just for you!

Send Customized Request
Product Catalog
Main Products
6 Products
Content
Product Image
Product Name
FOB Price
Port
Payment Terms
Product Package
Product Attribute
Product Table
Basic Info
  • Model NO.: ET-CR30T-F
  • Transmission Medium: Cable
  • Lightning Protection: With Lightning Protection
  • Condition: New
  • Gain: 85
  • Power Supply: Input AC90~264V, Output DC12V / 7A
  • Vswr: <1.6
  • Impedance: 50 Ohm
  • Automatic Level Control: 31dB
  • Transport Package: Carton
  • Origin: Shenzhen
  • Type: Signal Repeater
  • Standard: Standard
  • Certification: ISO, RoHS, CE
  • Outpower: 30dBm(1W)
  • Work Environment: Indoor
  • Noise Figure: <6dB
  • Frequency Stability: <0.01ppm
  • I /O Port: N-Female
  • Trademark: ETENDA
  • Specification: CE, ROHS
  • HS Code: 8517611010
Product Description
30dBm 85dB GSM/DCS/WCDMA 2G 3G Mobile Signal Repeater
Certification CE0700 and RoHS
 
What is a signal booster?
A signal booster is a wireless signal relay transmission device  that helps to extend the cellular coverage footprint in areas of weak or poor coverage.

Introduction:

This high power series repeater is ideal for use where a larger coverage range is required and for use in buildings where the signal may be interrupted by metal structures, thick walls, etc.You can get a better call experience and faster data download speed,while can save your phone battery life.

Coverage area up to 3500-4500 m² without interrupt depend on different power.

 

Application:

A typical repeater system consists of a donor/outdoor antenna that receives and transmits signal from nearby cell towers, coaxial cables, a signal repeater, and an indoor rebroadcast/service antenna.

It can used in Villages,Industrial areas,Commercial buildings,School, Hospital,Underground car park,Supermarket,Stadium etc.

30dBm 85dB GSM/Dcs/WCDMA 2g 3G Mobile Signal Repeater

 

Features:

1.Elegant and Compact design,good isolation and heat dissipation for long time operation.

2.Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

3.31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.

4.Limit output power for both uplink and downlink to avoid deep self-oscillations from interference BTS.

5.Wide input power range,low power consumption.

6.With good IMD3,it can have more antennas for covering without affect towers.

7.High linear design,the intermodulation and and spuriousness are suppressed effectively.

 

Specification:

 
RF Specifications
ItemsSpecifications
UplinkDownlink
Frequency RangeCDMA450452.5-457.5MHz462.5-467.5MHz
CDMA850 or LTE824-849MHz869-894MHz
GSM900 or LTE890 ~ 915 MHz935 ~ 960 MHz
EGSM900 or LTE880 ~ 915 MHz925 ~ 960 MHz
DCS1800 or LTE1710 ~ 1785 MHz1805 ~ 1880 MHz
PCS1800 or LTE1850 ~ 1910 MHz1930 ~ 1990 MHz
WCDMA2100 or LTE1920 ~ 1980 MHz2110 ~ 2170 MHz
AWS2100 or LTE1710 ~ 1755 MHz2110 ~ 2155 MHz
LTE698-716MHz728-746MHz
776-787MHz746-757MHz
832-862MHz791-821MHz
2500 ~ 2570 MHz2620 ~ 2690 MHz
as developed
IDEN800806MHz~821MHz851MHz~866MHz
TETRA380-385MHz
(or customized)
390-395MHz
(or customized)
GainET-CR27T-F≥ 75dB≥ 80dB
ET-CR30T-F≥ 80dB≥ 85dB
Output powerET-CR27T-F≥ 20dBm≥ 27dBm
ET-CR30T-F≥ 23dBm≥ 30dBm
Band widthWide Band
MGC ( Step Attenuation )≥ 31dB / 1dB step
Automatic Level Control≥ 31dB
Gain Flatness≤3-6dB(P-P) depend on the frequency and bandwidth
Noise Figure≤6dB
VSWR≤1.6
Group Delay≤5μs
Frequency stability≤0.01ppm
Spurious Emission & Output inter-modulationGSM Meet ETSI TS 151 026 V6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
Power LEDGreen light when power on
MTBF>50000 hours
Power Consumption< 35W
Power SupplyInput AC90~264V,output DC10V / 8A
Impedance50 ohm
Mechanical Specifications
I /O PortN-Female
Operating Temperature-25ºC~+55ºC
Environment ConditionsIP40
Dimensions270x350x55mm
Weight≤ 5Kg

 
Send your message to this supplier
Avatar
Mrs. Tina Zou
Sales Manager
*From:
To: Mrs. Tina Zou
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now